AV200 Ethernet over Twisted-Pair Transmitter (EoT) For Elevator Monitoring

Model: 7HT120 EOT Transmitter Device For Audio And Video

AV200 Ethernet over Twisted-Pair Transmitter For IP Camera Video

Audio & Video Transmission/High-Speed Data Communication

Designed for high-speed Ethernet signal transmission. It can transmit network signals over long distances through two-core wires. It is suitable for places where network cable transmission is inconvenient, such as elevators, ships, firefighting, mines, etc.

Allow Various transmission media

Supports any two-core cables ,including coaxial cables, twisted pairs, telephone lines, power cords (lower than DC 48V), ordinary wires, etc.

strong anti-interference, Simple To Use

It adopts OFDM carrier transmission principle,  ideal  for long-distance, high-reliability audio and video transmission and high-speed data communication.

Zero-Configuration Required, Easy-install

Replaces the network cable for transparent transmission, plug and play, does not require any settings, no impact on the original system either.

7HC120 topology

EoT Transmitter Overview

 

7HT120 is an Ethernet over Twisted-Pair (UTP) Extender/Transmitter, transmits HD videos and high-speed data signals, transfers IP HD network signals over all kinds of twisted-pair cables. (UTP/STP/2-Wire/Ethernet cable)

The EoT transmitter has advantages as long transmission range, AV200 fast communication rate, multimedia service support and flexible networking, widely applied to the transformation and upgrading of original analog system into such projects as network HD, web camera video long-range extension and elevator monitoring transmission, etc.

7HT120 EoT extender integrates twisted-pair interface and RJ45 connector, completely plug & play, doesn’t need IP address or any special installation requirement. It is very suitable for the alteration and extension projects in which cable cannot be newly added or cable is hard to be newly added.

In the elevator system usage scenario, 7HT120 EoT Transmitter can use the idle or lower than DC 48V two-core cable in the elevator accompanying cable to transmit audio and video data. The system can be used as soon as it is powered on as required, directly replacing the network cable to transmit data without any settings or changes to the original hardware or software system.

Features

EoT Extender Feature

*Support multi-node networking at most 8 terminal devices.

*Support 720P, 960P and 1080P HD IP network cameras.

*Ethernet extension over twisted-pair (UTP) cables with maximum transmission distance up to 600meters.

*AV200 Powerline spec with plug and play.

*128-bit AES encryption.

*Low power consumption.

*Side industry Interface: TP interface *1 and a RJ45 connector*.

*10/100/Base-T Ethernet on RJ45 with auto-negotiation.

Specification

EoT Extender Spec

 Interface TP interface*1
 RJ45 interface*1
Indicator Pwr, Pwm,Plc, Link
Powerline HomePlug AV，IEEE 802.3，IEEE 802.3u ,IEEE802.3u, IEEE802.3ab
Protocols CSMA/CA (Powerline)
Encryption AES 128-bit
Input Power DC 12V 1A
Power Consumption <1.5W
Modulation Technology OFDM (1024/256/64/16-QAM,QPSK,BPSK and ROBO)
Power Save Compliance with EuP
Size L: 70x W: 60x D:25 mm
Weight 180g
Frequency 2-28MHz
PHY Speed Ethernet 10/100(mbps); Powerline 200 (mbps)
Distance UTP(cat5e): 600meters
Package Contents 7HT120 Extender

User Manual
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, Windows 10, MAC OS,  or Linux
Environment Operating Temperature: 0~70 ℃(32 ℉~104℉)

Storage Temperature:   -20~70 ℃ (-4 ℉~158℉)

Operating Humidity: 10%~90% non-condensing;

Storage Humidity: 5%~90% non-condensing

About the Wiring:

Terminal Name Description Remarks
Power DC5-18V Input Use DC power Adapter
Two-core wire Communication between two devices Access two signal lines (spare line of elevator accompanying cable), the line sequence is not limited.
Ethernet Ethernet interface (RJ45) Access network cable.

 

pdf

Scroll to Top